The Following Simple Steps Will Help Dry Up

Once the nut is loosened and removed, pull out the stem.Turn off the water at the water-supply valve. Sometimes, you can also find them in the wall behind the shower assembly.The following simple steps will help dry up the problem of a leaky compression or stem-type disassembly of Pegasus faucet. There, you can find them in a closet behind a removable panel. In that case, you will have to turn it counter-clockwise to loosen and remove the same. You can do this by removing the screw and then lifting or jiggling the handle off.However, if there are no localized shutoffs for the disassembly of Pegasus faucet, you should use the main water shutoff for the building. You can find them usually under the sink.Once you are through with that, remove the faucet handle. However, you must make sure that yopu are following the above steps with proper care..As you can see, it is not that difficult.Reassemble the stem and Pegasus faucet assembly in reverse orderTurn the water supply back on and test for drips.For the disassembly of Pegasus faucet, now, replace with a new washer.Now, open the faucets to let water in the lines drain before beginning the disassembly of Pegasus faucet.With some types of Pegasus faucets, the stem itself may be threaded into the body of the faucet assembly.Now, loosen the locknut inside with a crescent wrench. Take the stem to.