The Following Simple Steps Will Help

With some types of Pegasus faucets, the stem itself may be threaded into the body of the faucet assembly. Sometimes, you can also find them in the wall behind the shower assembly.For the disassembly of Pegasus faucet, now, replace with a new washer. You can do this by removing the screw and then lifting or jiggling the handle off.Reassemble the stem and Pegasus faucet assembly in reverse orderTurn the water supply back on and test for drips.Now, loosen the locknut inside with a crescent wrench.However, if there are no localized shutoffs for the disassembly of Pegasus faucet, you should use the main water shutoff for the building.As you can see, it is not that difficult.Turn off the water at the water-supply valve.Once you are through with that, remove the faucet handle. However, you must make sure that yopu are following the above steps with proper care..The following simple steps will help dry up the problem of a leaky compression or stem-type disassembly of Pegasus faucet. In that case, you will have to turn it counter-clockwise to loosen and remove the same. Once the nut is loosened and removed, pull out the stem.Now, open the faucets to let water in the lines drain before beginning the disassembly of Pegasus faucet. There, you can find them in a closet behind a removable panel. You can find them usually under the sink. Take the stem to your local hardware or plumbing supply store and.